Enable MLD Snooping

About this task

Use the following procedure to enable MLD snooping on the switch.

Procedure

  1. In the navigation pane, expand Configuration > IPv6.
  2. Select IPv6 MLD.
  3. Select Snooping tab.
  4. Double-click SnoopEnable for the desired port.
  5. Select true to enable MLD snooping.
  6. Double-click SsmEnable.
  7. Select true to enable SSM.
  8. Select Apply.

Snooping Field Description

Use the data in the following table to use the Snooping tab.

Field

Description

IfIndex

Specifies the interface on which you enabled MLD snooping. It specifies the port number if the interface is a brouter port or the VLAN number if the interface is a VLAN.

SnoopEnable
Indicates the status of MLD snooping on the specified interface:

  • True – MLD snooping is enabled

  • False – MLD snooping is disabled

SsmEnable
Indicates the status of SSM on the specified interface:

  • True – SSM is enabled

  • False – SSM is disabled
9039040-00 Rev AB